There are a variety of plans on the internet that explain how to build a shed on your own. There are also a lot of variations. These are the basic steps for creating exterior housing for your personal mementos and tools.

Sheds range from extremely small to extremely large. The size of the shed should be determined by its purpose. If you plan on storing a lot of things then the unit will need to be large, if you are only going to store a few things then it can be relatively small.

Make sure that your shed is protected from the outside climate. This is especially important if you plan to store valuables or things that may mildew like fabric. You can even add insulation to the walls to help control the environment further.

Sheds are built beginning with the floor and working up. The first step is to add the deck piers that will be used as the supporting foundation for you storage unit. You can find ready made deck piers at most hardware stores.

The next step in building your unit will be to attach beams to the deck piers. These are going to be the beginning of your future floor. They will help to support the weight of shed contents, making them very important.

Once the beams are down add some floor joists. These are the next layer in flooring.

The floor joists now need to be covered in plywood subflooring. You will need to cover the floor joists with two layers of plywood that is around 3/4″ thick. Nail the outside edge of the plywood every 6″ or screw down with 3″ deck screws. This secures your subfloor to the foundation.

Once the floor is in place you will begin to work on the walls. Shed walls consist of four stud walls that are created using 2″ X 4″ studs every 16-24″ around the perimeter of your building. Space should also be left for doors and windows and door and window frames need to be installed at this point.

In order to provide plenty of spaces for hanging shelves and tools on the wall you will need to add vertical boards to your studs. These are known as noggings. You should always interlace four rows of vertical noggings along your walls.

Next add a floor plate made out of 2″ X 4″ boards to the bottom perimeter of the building. These should be used to aid in attaching the wall frames at the four corners. Everything should be flush and you should have a nice even shape to your emerging unit at this point.

You are now ready to start on the roof part of your frame. Add top plates around the top perimeter of your frame just as you did to the bottom, using the same type of wood. Then cut and fix the two beam supports so that they are on top of and in the middle of the top plates. Then proceed to add your rafters. Rafters need to be around 2 feet apart. You can then add noggings to the rafters to help support the roof.

After your frame is complete cover the roof with 1/2″ plywood. Once this is place you need to add three rows of purlins to each side of the roof. Add Fascia board along the roof making it flush with the top and bottom purlin. Always cover the roof with a self-supporting underlay before you add the corrugated metal roofing.

Add your roofing material and then move down to the walls. The walls are the final part. Add an underlay and then apply exterior and interior paneling of your choice. Attach any doors or windows and you are finished.

Most people could make use of additional garden or lawn storage, but need shed plans for instructions. Now you can easily download shed plans and have all the outdoor storage you need.

Tags: DIY plans, garden storage, gardening, home-improvement, storage sheds, tool sheds, tool storage

Print This Post

Rate this post:

Related Posts:

• No related posts

This entry was posted on Saturday, May 15th, 2010 at 10:55 am and is filed under gardening, Shed Plans. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.