There are many things that you should take into consideration when deciding to replace broken shingles or shingling a new roof on your storage shed. First of all, the slant of the roof; will you be comfortable working on it, or is it just too steep? The outside temperature will also determine how the shingles lay.

As soon as you choose to do the work yourself you are going to need to remember to keep your personal safety at the top of your mind at all times. While getting your storage shed roof shingled is an important job, you do not want to sacrifice your personal safety to get the job done. That being said, it is very possible to put shingles on your storage shed roof just as long as you have the proper tools and a good safety plan in place.

The materials you will need are a staple gun hammer, hammer staples, roofing felt, barbed roofing nails, utility or trimming knife, straightedge ruler, ridge cap shingles, and asphalt shingles.

Because you do not want to go over your budget and waste your time and purchase more materials then you are going to need. You are going to want to figure out just exactly the total area of your roof. You will then have an excellent idea as to just about the exact number of shingles that you are going to need to complete your job. After that has been figured out you can figure out what type, style, color and texture of shingle that you want to get.

The first thing to do would be to unroll the roofing felt over the plywood top of your roof. The felt should then be stapled down securely over the surface and around the edges to cover the entire roof.

If your project involves removing and replacing old shingles you are going to want to strip off any damaged materials so that you can check and see if there has been any damage to the wooden roof below. If all of the plywood is still properly nailed down you are in very good shape. If you are doing this you will want to use heavy felt paper.

You need to make sure that the very first layer of shingles that you are laying down is upside down so that all of the tabs are pointing up. You will then need to cut the first shingle about six inches using a straightedge and a utility knife. You should make sure that the bottom of the shingle should overhang the drip edge of the storage shed by at least 3/8 of an inch. You should use full sized shingles for the rest of the row and nail them down with roofing nails.

You start the next row with a full shingle and correctly position each shingle that you are using with the tar area near the top and the colored tabs on the bottom. Be sure to attach the shingles beginning from the base of the roof. You should use three or four roofing nails with each shingle.

Now that you have all the singles properly attached to your storage shed room you then should then cut off all parts of the shingles that are creating an overhang on the sides of your storage shed. Then all you need to do is the needed cleaning and additional trimming.

Be sure to trim off all of the excess shingles that are overhanging from the sides of your storage shed roof. If you would like to further reinforce your shingles to the shed roof you can use construction adhesive on the shingles. Once you have both sides of your roof shingled you are going to need to attach the roof cap shingles at the peak of the roof from side to side and then finish doing any trimming and cleaning up that needs to be completed.

Shingling a roof is not so difficult once you understand the basics. A good shingling job will provide your roof with a waterproof barrier that will last some 15 to 20 years.

Tags: gardening, home improvements, how to shingle shed, Landscaping, outdoor storage sheds, shingling, Storage, storage shed shingling, storage sheds

Print This Post

Rate this post:

Related Posts:

• No related posts

This entry was posted on Sunday, June 21st, 2009 at 2:04 am and is filed under gardening, outdoor storage. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.